$17,332.38 $14,443.65
Product in stock
Next day shipping available & this product ships globally

Standard items are shipped same day from stock (Mon-Fri) if ordered before 12pm. Goboplus will advise lead time on rare exceptions or non-standard items.

Your transaction is secure
Stripe Payments / SSL

Martin ERA 700 Performance IP

In stock


View full details

Martin Professional’s ERA 700 Performance IP is specially designed for permanent outdoor entertainment use and can withstand extreme environmental conditions for greater immersive lightshows. It offers a comprehensive toolkit for lighting design, including a CMYC color mixing system, full curtain framing system, dual gobo wheels, dual prisms, dual frost, animation, and a wide range of new gobo selections. Standing at only 759mm in height with an output of 26,000 lumens and weighing below 40kg, it is a reliable workhorse, delivering the perfect lumen output needed for larger outdoor shows and rental and installation applications. It is ideal for a wide range of architainment needs.

Designed around extreme environmental conditions, the ERA 700 Performance IP has the ability to work flawlessly from -20 degrees Celsius to +40 degrees Celsius, with C5M marine-grade salinity protection against harsh elements. The innovative active humidity control system maintains optimal humidity levels within the unit, preventing moisture-related issues and ensuring consistent performance.

This fixture also introduces several ground-breaking features that champion its functionality and security. It incorporates an anti-tamper box, preventing unauthorized access which also adds additional environmental protection increasing ingress protection to IP66.

Martin Professional’s ERA 700 Performance IP caters to the evolving needs of rental and installation markets. Its IP66 rating eliminates the need for outdoor protection domes, and its extensive feature set and robust design offers lighting designers and system integrators a reliable solution for long-term outdoor projects.

26,000 lumen output via 680W 6,500K light engine
IP65 (IP66 with anti-tamper box installed)
CMYC Color Mixing system
Zoom 5.4˚ to 44˚
1 x Rotating Gobo Wheel delivering 7 all new designs
1 x Static Gobo Wheel delivering 8 all new designs
1 x Animation wheel (new design)
Color Wheel with Spectral Enhancement filter pre-installed (CRI 90)
Full curtain framing system
2 x Prism (Linear and circular)
2 x Frost (heavy and medium)
DMX/RDM and Art-Net/sACN via network with bypass
Weight 39.7 kg
Height 759 mm
Available in black and white



Weight: 39.7 kg (87.3 lbs.)
Length (head): 542 mm (21.3 in.)
Length (base): 436 mm (17.1 in.)
Width (base): 314 mm (12.3 in.)
Width (across yoke): 450 mm (17.7 in.)
Height (head straight up): 759 mm (29.8 in)
Height (maximum): 767 mm (30.2 in)


Color mixing: CMY, independently variable 0-100%
Color wheel: 7 color filters plus open (incl, Spectral Enhancement Filter)
Gobo animation: Animation wheel, indexing, continuous rotation with variable speed and direction, shake (flow)
Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 8 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Framing: Rotatable framing module, +/-60°, with 4 individually controllable full framing blades with variable angle and position.
Prism: 2 rotating/indexing prisms (4-facet circular prism and 6-facet linear)
Frost: Soft frost effect and heavy frost effect
Color temperature control: Variable 6500 - 2700 K
Electronic dimming: 0 - 100%, four dimming curve options
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Zoom: Motorized
Pan: 540°, coarse & fine control and speed
Tilt: 270°, coarse & fine control and speed
Focus: Motorized


Control options: DMX, RDM, Art-Net, sACN
Protocol detection: Automatic
DMX channels: Basic 42 Extended 54
16-bit control: Dimming, CMY, CTO, Zoom, Focus, Framing, Gobo Rotation/Indexing, Pan and Tilt
Setting and addressing: Control panel with backlit LCD display and battery powered operation
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance: ANSI E1.31 - 2016
Transceiver: Opto-isolated RS-485


Front lens diameter: 120 mm (4.75 in.)
Zoom range: 5.4 to 44 (1:8)
Light source: 680 W LED engine
Minimum LED lifetime: 20000 hours (to >70% luminous output)*
Binning: Tight color and flux binning
*Manufacturer's figure obtained under manufacturer's test conditions

Light engine luminous output: 41,600 lumens
LED refresh rate : 3600 Hz

Fixture luminous output: 16,420
CRI (Color Rendering Index): 90
CQS (Color Quality Scale): 88
TM-30 Rf (IES TM-30-15 Fidelity Index): 87
TM-30 Rg (IES TM-30-15 Gamut Index): 106
TLCI (Television Lighting Consistency Index): 73
CCT: 6400 K (+/- 250 K)
Peak Luminous Intensity: TBA
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Fixture luminous output: 26,000 lumens
CRI (Color Rendering Index): 70
CQS (Color Quality Scale): 68
TM-30 Rf (IES TM-30-15 Fidelity Index): 71
TM-30 Rg (IES TM-30-15 Gamut Index): 94
TLCI (Television Lighting Consistency Index): 46
CCT: 6500 K (+/- 250 K)
Peak Luminous Intensity: 1393059 Cd (narrow


Housing: Recyclable high-impact flame-retardant thermoplastic and cast aluminum
Color: Black & White
Protection rating: IP 65 (IP 66 with anti-tamper box installed)
Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
Maximum image diameter: 19 mm (0.75 in.)
Gobo material: Borofloat 33
External diameter: 23.0 mm +0 / -0.2 mm (0.906 in. +0 / -0.008 in.)
Maximum gobo thickness: 1.1 mm (0.04 in.)
Coating: Speciality coating including CT correction


Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets
Location: Wet locations, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m (8 in.)
Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)


DMX and RDM data in/out: 5-pin locking XLR
AC mains power input.: TRUE1 compatible socket, accepts TRUE1 NAC3FX-W (TOP) connector
Ethernet Art-Net, sACN in/out, including fail-safe bypass: Neutrik etherCON
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 14A
Power factor: 0.97
Typical current draw: 100-120V 11.1A 200-240V 3.7A
Max leakage current: 0.43 mA


Maximum: 990 W
Typical: 856 W *
Idle: 114 W
Hibernation: 15 W
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Typical: full output white, no effects moving, regulated fan speed. Idle: no output, no effects moving, regulated fan speed.


Cooling: Forced air (temperature regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): -20° C
Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
Total heat dissipation (calculated, +/- 10%): 3375 BTU/hr


Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 44.3 dB(A)
Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): .38.3 dB(A)


RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 29.6 Lm/Watt
LWR*: .655 Lm/Kg
*LWR = Lumen-to-Weight Ratio

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: .EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM

Two omega brackets with 1/4 turn fasteners for rigging clamp attachment: 2 x P/N 91602001
Anti-Tamper Environmental Protection Box
Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
Martin Companion Cable USB/DMX hardware interface: P/N 91616091

Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789HU
Half-coupler clamp: P/N 91602005
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
T-shape omega bracket with 1/4 turn: PN 91602008

This is the most common question we're asked and you're certainly not alone in not knowing which to choose. Metal and Glass Gobos have their own advantages and disadvantages and the choice will really depend the design and the lantern you wish to project from. In many cases your lantern manufacturer will recommend a gobo material, so if unsure then please check with them or speak to a member of our team.

Metal Gobos
Patterns are etched from metal sheets to produce a stencil. Any 'islands' of metal are held in place with fine lines which may show in projection. Metal is cost effective and good for simple black & white designs. If you need to move the gobo from fixture to fixture or travel on the road with it, then it offers a pretty durable solution and will last the course. If you need to project something simple or as a one off then metal provides a cost effective solution.

Glass Gobos - Most Popular!
Images are created by etching away the metal or dichroic coating on the glass allowing for high resolution images, including greyscale and multi-colour. Glass Gobos are suitable for more detailed patterns, coloured logos and photographic images. They are recommended for long term use & the glass is able to withstand high temperatures in your lantern when handled correctly.

Can’t find your lantern manufacturer or model in the list?
Not sure what the details are of the lantern/light you’re planning to use?
Which gobo material should I choose?
How long does it take to produce the gobo?
I’m in a rush! Can you get gobos to be quicker?
I’m not sure which gobo would be right, can you help?
Where are your gobos made?

Can’t find your lantern manufacturer or model in the list?
If you can’t find either your lantern manufacturer or model in the drop down lists above then please select ‘other’ from the manufacturer dropdown. This will then provide a simple text field where you can detail as much information you have about your lantern. Don’t worry about finding out the gobo size, we’ll contact the manufacturer directly if we don’t already have the size listed for your gobo.

Not sure what the details are of the lantern/light you’re planning to use?
In order to produce your gobo in the correct size we’ll need to know which fixture you plan on projecting the gobo from. If you can’t access the fixture at this time then try and take a photo and send it to our team at [email protected] for more info.

Which gobo material should I choose?
Please refer to the “Which Gobo Material” tab.

How long does it take to produce the gobo?
Stock gobos are typically made to order and shipped the same day (depending on the time of your order). Custom gobos can take a slightly longer in order to ready the artwork and get your proofs approved. Our standard shipping offering deliver next day.

I’m in a rush! Can you get gobos to be quicker?
YES! We understand industry requirements and are used to turning orders around very quickly. If you have specific requirements then get in touch with our team and we’ll sort it out for you. We don’t charge a penny more...

I’m not sure which gobo would be right, can you help?
We sure can. Our staff are experts in gobo projection and we’ve pretty much seen it all done! If you’re looking for any advice when it comes to gobo projection then please get in touch.

Where are your gobos made?
We’re the leading dealer in the UK for Rosco products. All of our gobos are produced directly in the state of the art facility at Rosco in London & Texas. Rosco supports our vision of supplying the highest quality gobos by using the best materials and latest manufacturing technology, so we’ve become great partners.