** comes with the colour wheel as standard all other effects are an additional cost**
The Martin Exterior Projection Pro Compact is a next-generation outdoor image projector designed to inspire captivating creativity and versatility across a diverse range of architectural, façade, and landscape applications.
Featuring a modular design with 11 configurable options and up to four layers of effects, including precise façade framing, the fixture offers a broad spectrum of creative possibilities while minimizing complexity and cost. Its compact footprint and lightweight design facilitate pole mounting and seamless integration into various setups, delivering multiple application possibilities. The fixture’s sleek, professional appearance ensures it blends effortlessly into any environment.
The built-in zoom system enables precision adjustment of the projection angle from 15° to 45°, supported by an ultra-efficient optical system that consistently delivers 5,200 lumens across the entire zoom range. Engineered for maximum energy efficiency, the fixture includes a dedicated hibernation power mode, activated through the DMX control channel, significantly reducing power consumption when not in use.
Empowering users with control over multiple dynamic effects—including zoom, focus, colors, gobos, and animations—the Exterior Projection Pro Compact inspires the most creative applications. Using the optional framing module, the projected image can be framed to precisely match the façade. Smart controls feature a magnetic switch, DMX, RDM, and stand-alone programming via Martin Companion ensuring straightforward configuration and programming.
Engineered to meet stringent environmental standards, the fixture reduces its carbon footprint through its efficient optical system, FSC-certified packaging, and full repairability. Designed for permanent outdoor installations, it is fully outdoor-rated to withstand the harshest environmental conditions and is backed by Martin’s full, 5-year warranty.
With its modular design, compact form factor, and state-of-the-art features, the fixture is an incredibly advanced and cost-effective solution. Ideal for architectural lighting designers, architects, system integrators, and electrical contractors, it offers unmatched performance, versatility, and user-friendly operation.
Features
Flat-field, high-contrast image projection
5,200 lumens output across the entire zoom range
Efficient optical system with integrated 15° - 45° zoom system
Configurable design for reduction of resources, cost, and weight
One gobo or four gobo modules
Animation module
Manual framing module for precise framing of projected image
0-100% electronic dimming
Hibernation mode for very low power consumption
Compact and slim design
RDM and DMX control
Local diagnostics and focusing via magnetic sensor
Dedicated compartment for install of Power and DMX In/Out cables
Optional PD Hybrid In/Out cable solution
Automatic thermal management for safe operation in high and low ambient temperatures
Fully-weatherized housing (IP66, IK08 and C-5 High corrosion rating)
Shipped in FSC-certified cardboard packaging
5-year warranty
Specifications
Physical
Length: 342 mm (13.5 inch.)
Width: 272 mm (10.7 inch.)
Height: 335 mm (13.2 inch.)
Weight: 12.5-13.9 kg (27.5–30.6 lbs)
Weight depends on actual configuration
Dynamic Effects
Color wheel: 5 dichroic colors (red, green, blue, yellow, CTO) + open
Zoom: Motorized, 15° - 45° beam angle
Dimming: Electronic, 0-100% continuous dimming
Shutter: Strobe and pulse effects, instant open and blackout
Focus: Motorized, variable 3 m (9.8 ft.) to infinity
Accessory 1-gobo module: indexing, variable rotation
Accessory 4-gobo module: selection, indexing, variable rotation
Accessory animation module: Continuous rotation with variable speed and direction (always in aperture)
Accessory Framing module: 4 blades for manual adjustment of insert and angle (8 finger knobs with locking mechanism)
Control and Programming
User interface: Magnetic sensor to call up fixture status and focus fixture
Stand-alone control: Up to 20 scenes with individual fade/ hold times
Control options: DMX, RDM, stand-alone
Configuration, addressing and status: Via RDM
8-bit control: Color and gobo selection
16-bit control: Gobo indexing and rotation, Animation, Focus, Zoom and Intensity
DMX channels: 13/14 (Basic / Extended)
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Optics
Light source: 130W White light LED engine
LED lifetime: minimum 30,000 hours (to >70% luminous output)*
Full Zoom Range: 15° - 45° (Field Angle)
*Figure obtained under manufacturer's test conditions
Photometric Data
CRI (Color Rendering Index) : >70
Color Temperature: 7,500 K
Total output: 4,700 lumens
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
Construction
Housing: Cast aluminum
Finish: Hard anodized
Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress protection: IP66
Impact resistance: IK08
Corrosion resistance: C5 (very high corrosivity / marine, ISO 12944)
Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
EPA (Effective Projected Area): 0.1 m2
Color options: Traffic Grey RAL 7042, Traffic White RAL 9016, Traffic Black RAL 9017
Service Lid for gobo change or insert of accessory effect modules
Gobos
Suitable material: Borosilicate glass, coatings heat resistant to 450°C (842° F)
Gobo diameter: 19.0 mm +0/-0.3 mm (0.74 in. +0/-0.02 in.)
Maximum image diameter: 15 mm (0.59 in.)
Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)
Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in) HT paint
Installation
Mounting: Adjustable yoke
Location: Adjustable yoke
Orientation: Any, except horizontal angles above 70°
Minimum distance to illuminated surfaces: 0.5 m (20 in.)
Connections
Power cable entry: IP68 cable gland (accepts 8 mm-12 mm)
Power connection: Terminal for power in separate compartment
Data cable entry: Terminal for power in separate compartment
Data connection: Terminal for data in separate compartment
Electrical
AC power: 100-240/277 V nominal, 50/60 Hz
Power supply: Auto-ranging electronic switch-mode
Surge protection: 4 KV
Power factor: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Max current draw: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Typical current draw: 1.48 A @110 V, 0.71 A @230 V, 0.63 A @ 277 V *
Power Consumption
Maximum: 180 W
Typical: 160 W *
Idle: 10 W *
Hibernation: 3 W *
*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Typical: full output, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.
Thermal
Cooling: Convection, internal forced air
Maximum surface temperature: 60° C (140° F)
Maximum ambient temperature (Ta max.): 45° C (113° F) *
Minimum ambient temperature (Ta min.): -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)
Environmental
RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
FSC: Certified cardboard outer packaging
Efficacy (max output): 29.3 lm/W
LWR*: 376 lm/kg (171 lm/lbs.)
*LWR = Lumen-to-Weight Ratio
Approvals
Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55032(Class B),EN55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: ANSI/UL 1598
US EMC: CFR 47 Part 15 Class B
Canadian safety: CSA C22.2 No 250.13
Canadian EMC: CAN ICES (B)/ NMB(B)
Australia/NZ: RCM
BIS certification: (Pending)
Related Items
Martin Companion Cable (for firmware update over DMX): P/N 91616091
Martin Companion Software: free download from www.martin.com
Ordering Information - Fixtures
Exterior Projection Pro Compact, Grey: MAR-90560250
Exterior Projection Pro Compact, White: MAR-90560251
Exterior Projection Pro Compact, Black: MAR-90560252
Ordering Information - Accessory Modules
Manual framing module: MAR-90560260
Animation Module: MAR-90560261
One gobo holder module: MAR-90560262
Four gobo wheel module: MAR-90560263
Ordering Information - Accessories
Hybrid PD cable tail In/Out 0.5 m, black: MAR-91700020
Hybrid PD cable tail In/Out 0.5 m, white: MAR-91700022
Ordering Information - Related Items
Glareshield Black: MAR-90560264
Exterior Multitool: MAR-90590025
Attachment plate for safety wire: MAR-90590050
This is the most common question we're asked and you're certainly not alone in not knowing which to choose. Metal and Glass Gobos have their own advantages and disadvantages and the choice will really depend the design and the lantern you wish to project from. In many cases your lantern manufacturer will recommend a gobo material, so if unsure then please check with them or speak to a member of our team.
Metal Gobos
Patterns are etched from metal sheets to produce a stencil. Any 'islands' of metal are held in place with fine lines which may show in projection. Metal is cost effective and good for simple black & white designs. If you need to move the gobo from fixture to fixture or travel on the road with it, then it offers a pretty durable solution and will last the course. If you need to project something simple or as a one off then metal provides a cost effective solution.
Glass Gobos - Most Popular!
Images are created by etching away the metal or dichroic coating on the glass allowing for high resolution images, including greyscale and multi-colour. Glass Gobos are suitable for more detailed patterns, coloured logos and photographic images. They are recommended for long term use & the glass is able to withstand high temperatures in your lantern when handled correctly.
Can’t find your lantern manufacturer or model in the list?
Not sure what the details are of the lantern/light you’re planning to use?
Which gobo material should I choose?
How long does it take to produce the gobo?
I’m in a rush! Can you get gobos to be quicker?
I’m not sure which gobo would be right, can you help?
Where are your gobos made?
Can’t find your lantern manufacturer or model in the list?
If you can’t find either your lantern manufacturer or model in the drop down lists above then please select ‘other’ from the manufacturer dropdown. This will then provide a simple text field where you can detail as much information you have about your lantern. Don’t worry about finding out the gobo size, we’ll contact the manufacturer directly if we don’t already have the size listed for your gobo.
Not sure what the details are of the lantern/light you’re planning to use?
In order to produce your gobo in the correct size we’ll need to know which fixture you plan on projecting the gobo from. If you can’t access the fixture at this time then try and take a photo and send it to our team at [email protected] for more info.
Which gobo material should I choose?
Please refer to the “Which Gobo Material” tab.
How long does it take to produce the gobo?
Stock gobos are typically made to order and shipped the same day (depending on the time of your order). Custom gobos can take a slightly longer in order to ready the artwork and get your proofs approved. Our standard shipping offering deliver next day.
I’m in a rush! Can you get gobos to be quicker?
YES! We understand industry requirements and are used to turning orders around very quickly. If you have specific requirements then get in touch with our team and we’ll sort it out for you. We don’t charge a penny more...
I’m not sure which gobo would be right, can you help?
We sure can. Our staff are experts in gobo projection and we’ve pretty much seen it all done! If you’re looking for any advice when it comes to gobo projection then please get in touch.
Where are your gobos made?
We’re the leading dealer in the UK for Rosco products. All of our gobos are produced directly in the state of the art facility at Rosco in London & Texas. Rosco supports our vision of supplying the highest quality gobos by using the best materials and latest manufacturing technology, so we’ve become great partners.
