Advanced Martin Optics Meet Cutting-Edge LED Technology
Martin ELP Ellipsoids feature optic assemblies designed in Denmark by the technology innovators behind MAC Encore, the leading LED moving light. Illuminate everything you want to light and nothing you don’t: The ELP is designed to maximize efficiency and deliver a flat field of illumination for smoother blending and mixing between fixtures.
The ELP CL IP fixture offers an impressive 6,900 lumens and a CRI of 85 in High Output mode, and 5,900 lumens and 90 CRI in High Quality mode, with a color temperature of 6,000K (open white), and provides flicker-free operation for consistent light output on and off camera.
Classic Style With a Focus on Functionality
ELP CL IP takes a classic light fixture to new performance levels with a suite of innovative features. Our gear-based Fine Focus adjustment—an industry first—lets you lock focus exactly where you want it, instantly. There’s no refocusing, no drifting and no slipping. Our innovative Fast Focus feature brings the fixture to full output without data running to the fixture. Halation Color correction removes atypical blue and brown halos when using Martin lens tubes. Along with interchangeable lens tubes, fixtures offer 16-bit dimming with 4 selectable curves. Rugged enclosures are IP65 rated for water resistance and complete protection against dust and other particulates.
Danish engineering is all about efficiency and ergonomics, and ELP CL’s subtle details are no exception: We’ve placed the center of gravity as close to the yoke as possible, for more comfortable operation. And, we’ve placed tilt knobs out of the way of framing shutters, to allow quick, easy position adjustments.
Expand Versatility With ELP Zoom Lenses
In addition to a choice of four Martin static lens tubes in 19, 26, 36 and 50-degree beam angles you can expand the versatility and range of ELP with Zoom Lenses in 15–30-degree and 25–50-degree ranges. The 6 lens optical design delivers unrivaled optical performance, providing the ultrabright output, unmatched flat projection and crisp focus of a static lens, with the speed and flexibility of a zoom lens.
Invest in the Future, With a Minimal Financial Investment
It’s never been easier to transition your inventory to LED ellipsoids: The ELP line fits common lens tubes and accessories, which means you can save money by using your existing gel frames, gobo holders and rotators and lens tubes.
Key Features
Legendary Martin quality in LED ellipsoidal light fixtures
Advanced optics engineered in Denmark
RGBAL Luxeon Rebel LED engine delivers vibrant, saturated colors
Class-leading output of 6,900 lumens (in High Output mode)
Superior CRI rating of 90 (in high quality mode)
Fast focus feature for data free focusing
Revolutionary Fine Focus gear-driven focus-adjustment knob locks in placement the first time.
IP65 rated for water resistance and complete protection against dust and other particulates
26 color presets match industry-standard filters
16-bit dimming with 4 selectable dimming curves
Compatible with universal accessories such as gel frames and gobo holders and rotators
Options include 4 static lens tubes and 2 zoom lenses with compatibility for 3rd party accessories
Halation color correction removes atypical blue and brown halos when using Martin lens tubes.
Flicker-free operation
4-blade manual framing shutters
Center of gravity at yoke for ergonomic use
Regulated cooling for ultra-quiet operation
5-pin DMX/RDM and Neutrik True1 In/Thru connectivity
Specifications
DYNAMIC EFFECTS
Color mixing RGBLA
Color temperature range 2000–10000K
Color selection 26 color presets
Electronic dimming 0–100%
Strobe and pulse effect Variable speed and action, random strobe
Electronic 'shutter' effect Instant open and blackout
Electronic dimming Four dimming curve options
CONTROL AND PROGRAMMING
DMX channels 1/10/17
16-bit control Intensity, CTC, RGBLA
Control options DMX, stand-alone
PWM 600–2400 Hz
Setting and addressing Control panel with OLED display or via RDM
Stand-alone programming Control panel with OLED display
DMX compliance USITT DMX512-A
RDM compliance ANSI/ESTA E1.20
Transceiver Opto-isolated RS-485
OPTICS
Light source 91 x RGBAL Luxeon Rebel LEDs (19 Red, 24 Green, 12 Blue, 24 Lime, 12 Amber)
Color temperature 2000–10000K
Fixed Lens Tube Options 19°, 26°, 36° and 50°
Zoom Lens Tube Options 15–30° and 25–50°
Minimum LED lifetime 30 000 hours (to >70% luminous output)*
PHOTOMETRIC DATA (HIGH QUALITY MODE @ 6000K)
Light Engine luminous output 20000 lumen
Fixture luminous output 5900 lumen
CRI (Color Rendering Index) >90
CQS (Color Quality Scale) >87
TM-30 Rf (IES TM-30-15 Fidelity Index) >84
TM-30 Rg (IES TM-30-15 Gamut Index) >106
TLCI (Television Lighting Consistency Index) >87
PHOTOMETRIC DATA (HIGH OUTPUT MODE @ 5500K)
Light Engine luminous output 20000 lumen
Fixture luminous output 6900 lumen
CRI (Color Rendering Index) >85
CQS (Color Quality Scale) >90
TM-30 Rf (IES TM-30-15 Fidelity Index) >84
TM-30 Rg (IES TM-30-15 Gamut Index) >111
TLCI (Television Lighting Consistency Index) >85
CONSTRUCTION
Color(s) Black or white variant
Housing Die-cast aluminum
Protection rating IP65
GOBOS AND COLOR FRAME
Gobo size A size, 100 mm OD, 75 mm image*
Gobo size B size, 86 mm OD, 64.5 mm image*
Color frame size 159 x 159 mm (6.25 in. x 6.25 in.)
INSTALLATION
Mounting Adjustable bracket
Location Indoor, outdoor use, suitable for wet locations
Orientation Any
Minimum distance to combustible materials 0.2 m (0.7 ft.)
Minimum distance to illuminated surfaces 0.5 m (1.6 ft.)
CONNECTIONS
AC power in/thru P65-rated Neutrik PowerCON TRUE1 TOP
DMX & RDM data in/thru IP65-rated 5-pin XLR
ELECTRICAL
AC power 100–240 V nominal, 50/60 Hz
Power supply unit Auto-ranging electronic switchmode
Idle power (zero intensity) 5 W
Half-cycle RMS inrush current at 230 V, 50 Hz 18.0 A
Fixture link via PowerCON at 100-120 V Up to 4 fixtures
Fixture link via PowerCON at 200-240 V Up to 9 fixtures
TYPICAL POWER AND CURRENT
110 V, 60 Hz 2.4 A, 259 W, PF 0.99
208 V, 60 Hz 1.3 A, 250 W, PF 0.96
230 V, 50 Hz 1.3 A, 249 W, PF 0.95
240 V, 50 Hz 1.1 A, 249 W, PF 0.95
THERMAL
Cooling Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.) 40° C (104° F)
Minimum ambient temperature (Ta min.) 0° C (32° F)
Total heat dissipation (calculated, +/- 10%, at full intensity, full white) 1000 BTU/hr.
APPROVALS
Global CB Certification/IECEE IEC 60598-2-17 (IEC 60598-1)
EU safety EN 60598-2-17 (EN 60598-1), EN 62471, EN62493
EU EMC EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety UL 1573
US EMC FCC Part 15 Class B
Canadian safety CSA C22.2 No. 166
Canadian EMC ICES-3 (B)/NMB-3 (B); ICES-5 (B)/ NMB-5 (B)
Australia/NZ RCM
This is the most common question we're asked and you're certainly not alone in not knowing which to choose. Metal and Glass Gobos have their own advantages and disadvantages and the choice will really depend the design and the lantern you wish to project from. In many cases your lantern manufacturer will recommend a gobo material, so if unsure then please check with them or speak to a member of our team.
Metal Gobos
Patterns are etched from metal sheets to produce a stencil. Any 'islands' of metal are held in place with fine lines which may show in projection. Metal is cost effective and good for simple black & white designs. If you need to move the gobo from fixture to fixture or travel on the road with it, then it offers a pretty durable solution and will last the course. If you need to project something simple or as a one off then metal provides a cost effective solution.
Glass Gobos - Most Popular!
Images are created by etching away the metal or dichroic coating on the glass allowing for high resolution images, including greyscale and multi-colour. Glass Gobos are suitable for more detailed patterns, coloured logos and photographic images. They are recommended for long term use & the glass is able to withstand high temperatures in your lantern when handled correctly.
Can’t find your lantern manufacturer or model in the list?
Not sure what the details are of the lantern/light you’re planning to use?
Which gobo material should I choose?
How long does it take to produce the gobo?
I’m in a rush! Can you get gobos to be quicker?
I’m not sure which gobo would be right, can you help?
Where are your gobos made?
Can’t find your lantern manufacturer or model in the list?
If you can’t find either your lantern manufacturer or model in the drop down lists above then please select ‘other’ from the manufacturer dropdown. This will then provide a simple text field where you can detail as much information you have about your lantern. Don’t worry about finding out the gobo size, we’ll contact the manufacturer directly if we don’t already have the size listed for your gobo.
Not sure what the details are of the lantern/light you’re planning to use?
In order to produce your gobo in the correct size we’ll need to know which fixture you plan on projecting the gobo from. If you can’t access the fixture at this time then try and take a photo and send it to our team at [email protected] for more info.
Which gobo material should I choose?
Please refer to the “Which Gobo Material” tab.
How long does it take to produce the gobo?
Stock gobos are typically made to order and shipped the same day (depending on the time of your order). Custom gobos can take a slightly longer in order to ready the artwork and get your proofs approved. Our standard shipping offering deliver next day.
I’m in a rush! Can you get gobos to be quicker?
YES! We understand industry requirements and are used to turning orders around very quickly. If you have specific requirements then get in touch with our team and we’ll sort it out for you. We don’t charge a penny more...
I’m not sure which gobo would be right, can you help?
We sure can. Our staff are experts in gobo projection and we’ve pretty much seen it all done! If you’re looking for any advice when it comes to gobo projection then please get in touch.
Where are your gobos made?
We’re the leading dealer in the UK for Rosco products. All of our gobos are produced directly in the state of the art facility at Rosco in London & Texas. Rosco supports our vision of supplying the highest quality gobos by using the best materials and latest manufacturing technology, so we’ve become great partners.
