Ovation E-260WW IP takes the brilliant breakthrough concept of the Ovation E-260WW and places it outdoors. Our standard shutter assembly and lenses lend familiarity and ease-of-use to this groundbreaking IP65-rated ERS-style fixture with an output surpassing that of 750 W HPL. This groundbreaking ellipsoidal also boasts extremely smooth dimming down to the very bottom of the curve as well as a flat and even field of light for superior gobo projection. Selectable PWM, RDM, and onboard dimming curves ease setup and programming.
At a Glance:
Warm white ERS-style fixture with output exceeding a tungsten 750 W source
Fully IP65 rated for seasonal use indoors or out
Use of our standard Ovation beam shaping shutters and lenses lends familiarity and ease of use to the fixture
Ultra smooth 16-bit dimming, and 8-bit dimming curves to complement any lighting scheme.
Flat, even field of light for superior gobo projection
RDM (Remote Device Management) for added flexibility
Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
Optical
Light Source: 1 LED (WW) 230 W, (3.6 A), 3149 K, 50,000 hours life expectancyColor Temperature (at full): 3149 KCRI: 96Beam Angle (w/5° lens): 5°Beam Angle (w/10° lens): 7°Beam Angle (w/14° lens): 12°Beam Angle (w/19° lens): 14°Beam Angle (w/26° lens): 16°Beam Angle (w/36° lens): 20°Beam Angle (w/50° lens): 31°Beam Angle (w/15°–30° lens)(Narrow): 12°Beam Angle (w/15°–30° lens)(Wide): 14°Beam Angle (w/25°–50° lens)(Narrow): 21°Beam Angle (w/25°–50° lens)(Wide): 26°Field Angle (w/5° lens): 8°Field Angle (w/10° lens): 11°Field Angle (w/14° lens): 15°Field Angle (w/19° lens): 19°Field Angle (w/26° lens): 26°Field Angle (w/36° lens): 35°Field Angle (w/50° lens): 52°Field Angle (w/15°–30° lens)(Narrow): 15°Field Angle (w/15°–30° lens)(Wide): 29°Field Angle (w/25°–50° lens)(Narrow): 26°Field Angle (w/25°–50° lens)(Wide): 46°Dimming Modes: 4Lumens (w/5° lens): 9,605Lumens (w/10° lens): 10,047Lumens (w/14° lens): 11,308Lumens (w/19° lens): 10,546Lumens (w/26° lens): 12,455Lumens (w/36° lens): 12,793Lumens (w/50° lens): 12,258Lumens (w/15°–30° lens)(Narrow): 11,300Lumens (w/15°–30° lens)(Wide): 11,836Lumens (w/25°–50° lens)(Narrow): 13,220Lumens (w/25°–50° lens)(Wide): 13,632Illuminance (w/5° lens): 42,658 lux @ 5 m Illuminance (w/10° lens): 23,747 lux @ 5 m Illuminance (w/14° lens): 12,648 lux @ 5 m Illuminance (w/19° lens): 7,983 lux @ 5 m Illuminance (w/26° lens): 5,817 lux @ 5 m Illuminance (w/36° lens): 3,755 lux @ 5 m Illuminance (w/50° lens): 1,613 lux @ 5 m Illuminance (w/15°–30° lens)(Narrow): 13,155 lux @ 5 m Illuminance (w/15°–30° lens)(Wide): 5,884 lux @ 5 m Illuminance (w/25°–50° lens)(Narrow): 6,535 lux @ 5 m Illuminance (w/25°–50° lens)(Wide): 2,554 lux @ 5 m Selectable PWM: 600 Hz, 1,200 Hz, 2,000 Hz, 4,000 Hz, 6,000 Hz, 25,000 Hz
Dynamic Effects
Dimmer: Electronic Shutter/Strobe: Electronic Strobe Rate: 0 to 30 HzColor Temperature Presets: NoDim Modes: 4Built-in Automated Programs: Yes
Construction / Physical
Dimensions (fixture only): 19.49 x 11.14 x 18.42 in (495 x 342 x 506 mm)Dimensions (w/5° lens extended): 43.58 x 14.17 x 14.48 in (1107 x 360 x 368 mm)Dimensions (w/10° lens extended): 34.88 x 12.16 x 12.48 in (886 x 309 x 317 mm)Dimensions (w/14° lens extended): 28.7 x 11.14 x 18.42 in (790 x 342 x 506 mm)Dimensions (w/26° lens extended): 23.5 x 13.46 x 19.92 in (597 x 342 x 506 mm)Dimensions (w/15°–30° lens): 32.87 x 14.61 x 14.61 in (835 x 371 x 371 mm)Dimensions (w/25°–50° lens): 27.17 x 14.61 x 14.61 in (690 x 371 x 371 mm)Weight (fixture only): 20.2 (9.2 kg)Weight (w/5° lens): 26 lb (11.9 kg)Weight (w/10° lens): 24 lb (11 kg)Weight (w/14° lens): 25.6 lb (11.6 kg)Weight (w/26° lens): 24.4 lb (11 kg)Weight (w/15°–30° lens): 34.2 lb (15.5 kg)Weight (w/25°–50° lens): 31.8 lb (14.4 kg)Exterior Color: Black Gobo Size (Optional): “A”: 100 mm (outside), 75 mm (image), 2.5 mm (max. thickness)Gobo Size (Optional): “B”: 86 mm (outside), 64.5 mm (image), 2.5 mm (max. thickness)Accessory Holder/Gel Frame Size (5° lens): 14 in (356 mm)Accessory Holder/Gel Frame Size (10° lens): 12 in (304 mm)Accessory Holder/Gel Frame Size (14° lens): 7.5 in (191 mm)Accessory Holder/Gel Frame Size (19°, 26°, 36°, and 50° lens): 6.25 in (159 mm)Accessory Holder/Gel Frame Size (15°–30° lens): 7.5 in (191 mm)Accessory Holder/Gel Frame Size (25°–50° lens): 7.5 in (191 mm)
Connections
Power Connection: Edison (local) plug to Seetronic Powerkon IP65Power Input: Seetronic Powerkon IP65Power Output: Seetronic Powerkon IP65Data Connectors: 5-pin IP65 XLRCable Length (power): 5 ft (1.5 m)
Control
Control Protocol: DMX, RDMDMX Channels: 2, 3, 4 or 7Modes/Personalities: 4 personalities (2, 3, 4, 7)
Electrical
Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)Power Linking: 6 units @ 100 V; 7 units @ 120 V; 12 units @ 208 V; 13 units @ 230 V; 13 units @ 240 VPower and Current: 230 W, 2.30A @ 100 VPower and Current: 221 W, 1.95 A @ 120 V, 60 HzPower and Current: 215 W, 1.05 A @ 208 V, 60 HzPower and Current: 213 W, 1.03 A @ 230 V, 50 HzPower and Current: 228 W, 1.03 A @ 240 V
Certifications / Qualifications
CE, MET, FCCIP Rating: IP65, outdoor/wet, with pressure equalizing M12 GORE® valve
What's Included
Ovation E-260WW IP Seetronic Powerkon IP65 power cord
Required Accessories
Lens Tube: 19°, 26°, 36°, 50°
Optional Accessories
Professional Clamps: CTC-50HC, CTC-50HCNNeutrik powerCON cables3-pin or 5-pin DMX CablesColor Blending Filters: DF60X1D, DF20DRDM2goOvation Zoom Lenses: OHDZOOM1530, OHDZOOM2550Gobo Holder: Ovation GR-1IP, Standard “S4” size Sandwich Style or Iris Slot Style gobo holder for “A” or “B” size gobos
ORDERING INFO
Item Code: 03121239
This is the most common question we're asked and you're certainly not alone in not knowing which to choose. Metal and Glass Gobos have their own advantages and disadvantages and the choice will really depend the design and the lantern you wish to project from. In many cases your lantern manufacturer will recommend a gobo material, so if unsure then please check with them or speak to a member of our team.
Metal Gobos
Patterns are etched from metal sheets to produce a stencil. Any 'islands' of metal are held in place with fine lines which may show in projection. Metal is cost effective and good for simple black & white designs. If you need to move the gobo from fixture to fixture or travel on the road with it, then it offers a pretty durable solution and will last the course. If you need to project something simple or as a one off then metal provides a cost effective solution.
Glass Gobos - Most Popular!
Images are created by etching away the metal or dichroic coating on the glass allowing for high resolution images, including greyscale and multi-colour. Glass Gobos are suitable for more detailed patterns, coloured logos and photographic images. They are recommended for long term use & the glass is able to withstand high temperatures in your lantern when handled correctly.
Can’t find your lantern manufacturer or model in the list?
Not sure what the details are of the lantern/light you’re planning to use?
Which gobo material should I choose?
How long does it take to produce the gobo?
I’m in a rush! Can you get gobos to be quicker?
I’m not sure which gobo would be right, can you help?
Where are your gobos made?
Can’t find your lantern manufacturer or model in the list?
If you can’t find either your lantern manufacturer or model in the drop down lists above then please select ‘other’ from the manufacturer dropdown. This will then provide a simple text field where you can detail as much information you have about your lantern. Don’t worry about finding out the gobo size, we’ll contact the manufacturer directly if we don’t already have the size listed for your gobo.
Not sure what the details are of the lantern/light you’re planning to use?
In order to produce your gobo in the correct size we’ll need to know which fixture you plan on projecting the gobo from. If you can’t access the fixture at this time then try and take a photo and send it to our team at [email protected] for more info.
Which gobo material should I choose?
Please refer to the “Which Gobo Material” tab.
How long does it take to produce the gobo?
Stock gobos are typically made to order and shipped the same day (depending on the time of your order). Custom gobos can take a slightly longer in order to ready the artwork and get your proofs approved. Our standard shipping offering deliver next day.
I’m in a rush! Can you get gobos to be quicker?
YES! We understand industry requirements and are used to turning orders around very quickly. If you have specific requirements then get in touch with our team and we’ll sort it out for you. We don’t charge a penny more...
I’m not sure which gobo would be right, can you help?
We sure can. Our staff are experts in gobo projection and we’ve pretty much seen it all done! If you’re looking for any advice when it comes to gobo projection then please get in touch.
Where are your gobos made?
We’re the leading dealer in the UK for Rosco products. All of our gobos are produced directly in the state of the art facility at Rosco in London & Texas. Rosco supports our vision of supplying the highest quality gobos by using the best materials and latest manufacturing technology, so we’ve become great partners.
